Valley Balancing |
|
Boyd's Drive Line Service of Stockton |
| 1900 Herndon Road * Ceres, CA 95307 | 679 E. Miner Ave * Stockton, CA 95202 | |
| 209-538-8956 * fax-209-537-8956 | 209-944-9966 * fax-209-944-9968 |
Valley Balancing |
|
Boyd's Drive Line Service of Stockton |
| 1900 Herndon Road * Ceres, CA 95307 | 679 E. Miner Ave * Stockton, CA 95202 | |
| 209-538-8956 * fax-209-537-8956 | 209-944-9966 * fax-209-944-9968 |
Dana End Yokes
Hex Hole Catalogue
| Series | Dimension D | Dimension K | (P) Hex Across Flats | (R) Hub Diameter | (W) Set Screw Diameter | Set Screw Location | (S) C/L to Hub End | Part # |
| 1000 | 0.940 | 1.500 | 0.875 | 2.000 | 0.375 | 3 | 2.500 | 10-4-282 |
| 1000 | 0.940 | 1.500 | 1.125 | 2.000 | 0.375 | 3 | 2.500 | 10-4-32 |
Rectangular Hole Catalogue
| Series | Dimension D | Dimension K | Rectangular Hole Long Side | Rectangular Hole Short Side | (W) Set Screw Diameter | Drilled Pin Hole | Part # |
| 1.125 | 1.000 | 0.375 | 2-4-72 | ||||
| 1140 | 1.060 | 1.810 | 1.000 | 1.125 | 1-4-242 |
Square Hole Catalogue
| Series | Dimension D | Dimension K | (P) Hex Hole Diameter | (R) Hub Diameter | (W) Set Screw Diameter | Set Screw Location | (S) C/L to Hub End | Part # |
| 1000 | 0.940 | 1.500 | 0.750 | 1.625 | 0.375 | 3 | 2.500 | 10-4-22 |
| 1000 | 0.940 | 1.500 | 0.812 | 1.969 | 0.375 | 3 | 2.500 | 10-4-42 |
| 1000 | 0.940 | 1.500 | 0.875 | 1.625 | 0.375 | 3 | 2.875 | 10-4-62 |
| 1000 | 0.940 | 1.500 | 0.875 | 1.719 | 2.500 | 10-4-82 | ||
| 1000 | 0.940 | 1.500 | 0.875 | 1.969 | 0.375 | 3 | 2.500 | 10-4-12 |
| 1000 | 0.940 | 1.500 | 1.000 | 2.000 | 0.375 | 3 | 2.500 | 10-4-52 |
| 1140 | 1.060 | 1.810 | 1.000 | 0.375 | 1-4-222 | |||
| 1240 | 1.130 | 2.880 | 1.000 | 2-4-152 | ||||
| 1310 | 1.060 | 3.470 OR 3.220 | 0.875 | 2.120 | 2.560 | 2-4-502 |
Tapered Hole Catalogue
| Series | Dimension D | Dimension K | (P) Tapered Hole Diameter (lg dia) | (X) Keyway Width | (R) Hub Diameter | (Q) Length thru Hole | (S) C/L to Spline End | Style | Part # |
| 1310 | 1.060 | 3.470 OR 3.220 | 1.125 | 0.312 | 1.750 | 1.500 | 3.000 | UB | 2-4-154 |
| 1310 | 1.060 | 3.470 OR 3.220 | 1.250 | 0.312 | 2.125 | 1.500 | 2.938 | UB | 2-4-64 |
| 1310 | 1.060 | 3.470 OR 3.220 | 1.375 | 0.375 | 2.125 | 2.000 | 3.438 | UB | 2-4-824 |
| 1310 | 1.060 | 3.470 OR 3.220 | 1.375 | 0.375 | 2.250 | 2.000 | 3.438 | UB | 2-4-834 |
| 1310 | 1.060 | 3.470 OR 3.220 | 1.496 | 0.375 | 2.200 | 2.000 | 3.450 | BS | 2-4-854 |
| 1350 | 1.190 | 3.880 OR 3.630 | 1.246 | 0.312 | 2.250 | 1.500 | 3.000 | BS | 3-4-54-1 |
| 1350 | 1.190 | 3.880 OR 3.630 | 1.250 | 0.314 | 2.620 | 1.475 | 3.250 | BS | 3-4-234-1 |
| 1350 | 1.190 | 3.880 OR 3.630 | 1.375 | 0.375 | 2.250 | 2.000 | 3.531 | BS | 3-4-24-1 |
| 1350 | 1.190 | 3.880 OR 3.630 | 1.496 | 0.375 | 2.250 | 2.000 | 3.500 | BS | 3-4-84-1 |
| 1410 | 1.190 | 4.440 OR 4.190 | 1.375 | 0.375 | 2.250 | 2.000 | 3.688 | BS | 3-4-154-1 |
| 1410 | 1.190 | 4.440 OR 4.190 | 1.375 | 0.375 | 2.250 | 2.000 | 3.688 | BS | 3-4-14-1 |
| 1410 | 1.190 | 4.440 OR 4.190 | 1.496 | 0.375 | 2.500 | 2.000 | 3.812 | BS | 3-4-64-1 |
| 1650 | 1.630 | 5.590 | 1.750 | 0.438 | 2.875 | 2.250 | 4.312 | BS | 5-4-1324 |
